drupal

In the previous article we defined what art direction is and how to address it using the <picture> element. In this post, the focus will be how to address responsive images when the requirement is image resolution switching. Resolution switching, in the context of responsive images, is rendering identical image content on all devices. Unlike art direction where each device gets a differently cropped image that may vary on aspect ratio, resolution switching uses images that are simply larger or smaller based on the device but retain the same aspect ratio and cropping settings. Resolution switching is how most images are rendered (the rule), the <picture> element approach is the exception to the rule. Take a look at an example of resolution switching below.

The image above demonstrate how multiple resolutions of the same image can be served to different devices. All the images in the example above are cropped exactly the same maintaining the same aspect ratio from large to small.

Using srcset and sizes attributes

Using the srcset and sizes image attributes is how most images are rendered in the web today. As indicated before, this is the recommended way for configuring responsive images if all you need is to switch resolution of images rather than art direction. So how does this approach work? Let's take a look at a typical configuration of the <img> tag using the image above as an example of the different image sizes we will want the browser to choose from:

<img srcset="original-image.jpg 2400w, extra-large.jpg 2000w, large.jpg 1600w, medium.jpg 1080w, small.jpg 800w, x-small.jpg 500w" sizes="100vw" src="large.jpg" alt="Image of sky shown at different resolutions" />

Let's break things down so we can understand this approach better.

• <img>: Right off the bat we start by using a widely supported html tag.
• srcset: The srcset attribute in the img tag serves two important roles, 1) It stores a list of images that can be used by the browser, 2) Each image provides its width value which plays a role on the browser choosing the right image.
• sizes: The sizes attribute tells the browser the width, in relation to the viewport, the image should be rendered at. The value of 100vw shown above, means the image will be rendered at 100% the viewport width on all the devices. You could also use media queries like (max-width: 720px) 100vw, 50vw. This means that if the device does not exceed 720px in width, the image will be rendered at 100% the viewport width, otherwise (if the device is larger than 720px), the image will be rendered at 50% the viewport width.
• src: The src attribute is used as a fallback if everything fails.

What does it all mean?

Let me explain things in more detail because it is important we understand how this approach is so much better than using the <picture> element.

The biggest difference/advantage of using srcset and sizes versus <picture>, is the fact that we let the browser decide which image is the best image to render on any device. This is possible thanks to all the information we have supplied to the browser. For example, in the srcset we are not only providing the browser with a list of images to choose from, but we are also telling the browser how big each image is. This is very important because the browser will use this information when choosing the image to render. In the <picture> element approach, the image size descriptors are not available.

The sizes value tells the browser the size the image needs to be rendered at in relation to the viewport. This too is extremely important information we are providing the browser because if the browser knows the dimensions of all the images to choose from and how big/small the image needs to be rendered, then the browser is able to pick the best image possible.

But that's not all, the browser is smarter and knows more about the web environment than we do when a page or image is rendered. For example, the browser knows the viewport width used when viewing a website, it knows how fast/slow your internet connection is, and it knows about any browser preference settings (if any), setup by the user. Using all this information the browser is able to determine which image from the srcset is the best to use. In contrast, with the <picture> element, we tell the browser which image to use solely based on the device size.

Closing the gap

Now let's see how using the srcset and sizes attributes closes the gap we identified when using the <picture> tag.

Environment conditions What the developer knows
during development What the browser knows
during image rendering Viewport dimensions No Yes Image size relative to the viewport Yes No Yes via sizes Screen density No Yes Images dimensions Yes No Yes via srcset

Pretty nice huh? Now thanks to the srcset and sizes attributes we've closed the gap and the browser has all the information it needs to ensure the best image is served to each device.

The next post of this series will focus on image styles. These are fun but can also get you in a lot of trouble if not properly done. See you there.

In closing

Time for a story: I recently did an experiment that 100% proves the use of resolution switching using srcset and sizes attributes. As most people nowadays, I use a very large second display when working on projects to fit more apps and see things better. My second display is nice but it's not a 4K display. It's double the physical size of my mac's screen, but the mac's screen resolution is higher by almost double (twice the number of pixels). When I look at an image of a project where I've implemented the practices in this guide, in the large display, and inspected the page, I see the browser has selected an image that is 720px which makes complete sense for the use case I am testing. I then unplugged the second display and viewed the page on my mac's screen (higher resolution), I reloaded the page and inspected it, I noticed the browser has now selected an image that is double the size of the first image. This is exactly the behavior I would expect because my mac screen is of higher resolution and my connection speed is very fast. So the browser was able to make the smart decision to use a different images based on my environment.

Navigate posts within this series

• < Art Direction using the picture HTML element
• Image styles in Drupal >

In the previous article of this guide we covered the concept of responsive images and some of the challenges that come with implementing an effective system for them. In this article we will go in detail about the concept of "Art Direction" and how this applies to responsive images.

What is art direction?

In the context of responsive images, art direction is the ability to display differently-cropped images based on the device size. For example, a large landscape shot of a person rowing in the middle of a lake is shown when viewed on a large desktop device. If we were to use the same image on a mobile device, that image would shrunk down, making the person in the image very small and hard to see. A better option would be to show a different version of the image that zooms in and focuses on the most important part of the image, the person rowing. See an example of this image below.

Enter the <picture> HTML element

In order to achieve art direction we need to be able to query for the size of the device being used to view the website. Once we've identified the device size we instruct the browser which image to use based on the device size. This will allow us to provide a better user experience as each device will display an image intended specifically for that device. Going back to the image above, we can see that the main image has been cropped differently to ensure the most important part of the image is displayed on each divice.

So how do we query for the device size and how do we instruct the browser which image to use? This is where the <picture> element/tag comes in. Let's take a look at the code that makes all this possible and break it down.

<picture> <source media="(min-width: 2400px)" srcset="images/rowing-2400.jpg 1x, images/rowing-4800.jpg 2x" type="image/webp"> <source media="(min-width: 1280px)" srcset="images/rowing-1400.jpg 1x, images/rowing-2800.jpg 2x" type="image/webp"> <source media="(min-width: 640px) and (max-width: 1279px)" srcset="images/rowing-1200.jpg 1x, images/rowing-2400.jpg 2x" type="images/webp"> <img src="images/rowing-1200.jpg" srcset="images/rowing-2400.jpg 2x" alt="Person rowing on a lake" width="1200" height="800"> </picture>

Note: The order in which the media queries are written within the <picture> tag matters. The browser will use the first match it finds even if it's not the intended one. Therefore, consider the media query order very carefully to ensure the right image is served.

• <picture>: The <picture> tag is simply a wrapper. On its own it does not do anything.
• <source>: The <picture> HTML element contains zero or more <source> elements. The browser will consider each child <source> element and choose the best match among them. If no matches are found—or the browser doesn't support the <picture> element—the URL of the <img> element's src attribute is selected. The selected image is then presented in the space occupied by the <img> element.
• Within the <source> element, you will find some very handy attributes (media, srcset, and type):
  • media: Rembember earlier we said we need to query for the device size? Well, within the media attribute you can write media queries much like the media queries you write in CSS (media="(min-width: 600px)"). This is how we check the size of the device when a page is rendered.
  • srcset: This attribute allows us to provide a list of images the browser can use when the media query finds a match (srcset="img-768.jpg, img-1440.jpg").
  • type: The type attribute specifies a MIME type for the resource URL(s). This is optional if using common image types such as JPG, PNG, TIFF, etc. If you plan on providing images in different file formats, you can do so using the type attribute. This is handy in the event the browser does not support a specific file type (type="image/avif"), as you can then provide a supported file type.
• <img>: The img element serves two purposes:
  • It describes the dimensions of the image and its presentation
  • It provides a fallback in case none of the offered <source> elements are able to provide a usable image.

And there you have it. The <picture> element is a great way to serve different images based on things like device size or screen density. When the <picture> element was first introduced it required a pollyfill as not all browsers supported it. Nowadays, unless you are supporting Internet Explorer 11 (sorry bro), all other major browsers provide native support for it. Take a look at the chart below for current browser support.

Great! Let's use <picture> on all our images ...NOOOOOOOO!!!!!!

Say what? If the <picture> element is so great, why can't we use it for rendering all of our images? Well, as great as the <picture> element is, it should not be the default solution for serving responsive images in your site. The only use case for the <picture> element is when you are trying to achieve "Art Direction" (cropping your images differently for each device size).

Remember at the begining of this post when I said "In order to achieve art direction we need to be able to query for the device size. Once we've identified the device size we instruct the browser which image to use..."? There lies the problem. Let me explain.

The issue with the statement above is that "we are telling the browser which image". Not only that, but we are doing so solely based on the size of the device. This may not always be the best way to determine which image a device should use. Imagine you are using a nice relatively new laptop with a super high density screen. Based on our rules established within the <picture> element code snippet above, we would end up with an image that is 4800px in size. This is a pretty large image but it's the one that meets our creteria defined in the media query above. If you're home with a decent wifi connection you will never see any issue loading an image this large, but imagine you are working out of a coffee shop, or at a conference with poor wifi connection, or worse yet, you're on the road using your phone as a hotspot and your signal is very bad, now you will really experience some performance issues because we are telling the browser to load the largest image possible because your computer screen is big (relatively speaking). With the <picture> element we can't check how fast your internet connection is, or whether there are browser preferences a user has configured to account for slow internet speeds. We are basing everything on the size of the device.

Then why use the picture element? Well, when developing a website, the developer does not have all the information they need to serve the best image. Likewise, when rendering a page and using the <picture> tag, the browser does not know everything about the environment. The table below shows this in more detail and exposes the gap between the developer and the browser.

Identifying the gap when using <picture>

Environment conditions What the developer knows
during development What the browser knows
during image rendering Viewport dimensions No Yes Image size relative to the viewport Yes No Screen density No Yes Images dimensions Yes No

You may be wondering: "Why did you get us all excited about the <picture> element if we can't really use it?" well, if you are trying to achieve art direction, then you use the <picture> element. It's the recommended approach for that use case. If you are looking for resolution switching, a use case for most images in the web, you need to use the srcset and sizes attributes approach. In the next post we'll dive deep into this technique.

Navigate posts within this series

• < Responsive images in Drupal - a guide
• Image resolution switching using srcset and sizes attributes >

Images are an essential part of a website. They enhance the appeal of the site and make the user experience a more pleasant one. The challenge is finding the balance between enhancing the look of your website through the use of images and not jeopardizing performance. In this guide, we'll dig deep into how to find that balance by going over knowledge, techniques and practices that will provide you with a solid understanding of the best way to serve images to your visitors using the latest technologies and taking advantage of the advances of web browsers in recent years.

Hi, I hope you are ready to dig into responsive images. This is a seven-part guide that will cover everything you need to know about responsive images and how to manage them in a Drupal site. Although the excercises in this guide are Drupal-specific, the core principles of responsive images apply to any platform you use to build your sites.

Where do we start?

Choosing Drupal as your CMS is a great place to start. Drupal has always been ahead of the game when it comes to managing images by providing features such as image compression, image styles, responsive images styles and media library to mention a few. All these features, and more, come out of the box in Drupal. In fact, most of what we will cover in this guide will be solely out of the box Drupal features. We may touch on third party or contrib techniques or tools but only to let you know what's available not as a hard requirement for managing images in Drupal.

It is important to become well-versed with the tools available in Drupal for managing images. Only then you will be able to make the most of those tools. Don't worry though, this guide will provide you with a lot of knowledge about all the pieces that take part in building a solid system for managing and serving responsive images.

Let's start by breaking down the topics this guide will cover:

1. What are responsive images?
2. Art Direction using the <picture> HTML element
3. Image resolution switching using srcset and sizes attributes
4. Image styles and Responsive image styles in Drupal
5. Responsive images and Media
6. Responsive images, wrapping up

What are responsive images?

A responsive image is one whose dimensions adjust to changes in screen resolutions. The concept of responsive images is one that developers and designers have been strugling with ever since Ethan Marcotte published his famous blog post, Responsive Web Design, back in 2010 followed by his book of the same title. The concept itself is pretty straight forward, serve the right image to any device type based on various factors such as screen resolution, internet speed, device orientation, viewport size, and others. The technique for achieving this concept is not as easy. I can honestly say that over 10 years after reponsive images were introduced, we are still trying to figure out the best way to render images that are responsive. Read more about responsive images.

So if the concept of responsive images is so simple, why don't we have one standard for effectively implementing it? Well, images are complicated. They bring with them all sorts of issues that can negatively impact a website if not properly handled. Some of these issues include: Resolution, file size or weight, file type, bandwidth demands, browser support, and more.

Some of these issues have been resolved by fast internet speeds available nowadays, better browser support for file tyes such as webp, as well as excellent image compression technologies. However, there are still some issues that will probably never go away and that's what makes this topic so complicated. One issue in particular is using poorly compressed images that are extremely big in file size. Unfortunately often times this is at the hands of people who lack the knowledge of creating images that are light in weight and properly compressed. So it's up to us, developers, to anticipate the problems and proactively address them.

Ways to improve image files for your website

If you are responsible for creating or working with images in an image editor such as Photoshop, Illustrator, GIMP, and others, you have great tools at your disposal to ensure your images are optimized and sized properly. You can play around with the image quality scale as you export your images and ensure they are not bigger than they need to be. There are many other tools that can help you with compression. One little tool I've been using for years is this little app called ImageOptim, which allows you to drop in your images in it and it compresses them saving you some file size and improving compression.

Depending on your requirements and environment, you could also look at using different file types for your images. One highly recommended image type is webp. With the ability to do lossless and lossy compression, webp provides significant improvements in file sizes while still maintaining your images high quality. The browser support for webp is excellent as it is supported by all major browsers, but do some research prior to start using it as there are some hosting platforms that do not support webp.

To give you an example of how good webp is, the image in the header of this blog post was originally exported from Photoshop as a .JPG, which resulted in a 317KB file size. This is not bad at all, but then I ran the image through the ImageOptim app and the file size was reduced to 120KB. That's a 62% file size reduction. Then I exported the same image from Photoshop but this time in .webp format and the file size became 93KB. That's 71% in file size reduction compared to the original JPG version.

A must have CSS rule in your project

By now it should be clear that the goal for serving images on any website is doing it by using the responsive images approach. The way you implement responsive images on your site may vary depending on your platform, available tools, and skillset. Regardless, the following CSS rule should always be available within your project base CSS styles and should apply to all images on your site:

img { display: block; max-width: 100%; }

Easy right? That's it, we're done 😃

The CSS rule above will in fact make your images responsive (images will automatically adapt to the width of their containers/viewport). This rule should be added to your website's base styles so every image in your website becomes responsive by default. However, this should not be the extend of your responsive images solution. Although your images will be responsive with the CSS rule above, this does not address image compression nor optimization and this will result in performance issues if you are dealing with extremly large file sizes. Take a look at this example where the rule above is being used. Resize your browser to any width including super small to simulate a mobile device. Notice how the image automatically adapts to the width of the browser. Here's the problem though, the image in this example measures 5760x3840 pixels and it weights 6.7 MB. This means, even if your browser width is super narrow, and the image is resized to a very small visual size, you are still loading an image that is 6.7 MB in weight. No good 👎

In the next post of this series, we will begin the process of implementing a solution for handling responsive images the right way.

Navigate posts within this series

• Art Direction using the <picture> HTML element

Recently I was building a component that required a static image which was not stored in the database but instead needed to be stored somewhere in the file system of the site. There are several ways for serving a static image for example we could have stored the image in the sites/default/files/images/ directory. A very common approach which in many cases would work just fine, however, in my case I was building a component and I wanted for the component image to be located within the same component's directory. This makes sense because if I wanted to reuse or share this component, all component assets would be included in a single directory.

Requirements

My goal with this task was to dynamically point to the image regardless the site this component was running on. Oh yeah, we are running a multi-site architecture with hundreds of sites and a single code base. So this component needed to work in all of these hundreds of sites. Now the challenge seems a little more... "challenging".

¡Manos a la hobra'!'

I started by doing research to determine the best way possible to achieve this. I read about using a pre-process function that would generate a dynamic base path of the site but I was hoping I could keep things simple and do everything on the front-end with only Twig. This would make it a more appealing approach for front-end developers.

After some research, I came across two little gems that became game-chargers for my project. One of these gems is the {{ url('<front>') }} Twig function. This will provide the current site's homepage/base path. The other very handy Twig function is {{ active_theme_path() }} which prints the path of the current active theme (themes/custom/my_theme). While researching for this task, I also found you can use the {{ directory }} Twig variable in your theme's templates to print the active theme's path. A word of coution when using either the {{ active_theme_path() }} function of the {{ directory }} variable as these could have different results depending on your whether you are using them in a base or sub theme. Here's a drupal.org issue that discusses this in more detail.
Armed with these two little functions, and one Twig variable, we can now work in generating a dynamic path to our theme's directory where the static image for our component is located. So this may seem like a simple thing but remember, our component's image should work regardless of the site the component is used on within our multi-site architecture. Some sites even use a different sub-theme but the parent theme is always the same which is where our image is stored.

Building the dynamic path

Before we can use the first function we need to run it through the |render Twig filter. Since Twig will return an array from the {{ url() }} function, we need to convert it to a string because we need the value of the function. Let's take a look:

{{ url('<front>')|render }} # This will give us http://my-site.com/

Next let's work with the theme path function. Similarly to the function above, we will use the |render Twig filter to convert it from an array to a string.

{{ active_theme_path()|render }} # This will give us themes/custom/my-theme

Now that we have two strings we can joint them together to compose the full path to our image:

<img src="{{ url('<front>')|render }}{{ active_theme_path()|render }}/images/image.jpg" alt="alt text" />

If we want to get fancy we could actually set a variable to shorten things a bit:

{% set theme_url = url('<front>')|render ~ active_theme_path()|render %} <img src="{{ theme_url ~ '/images/image.jpg' }}" alt="alt text" />

And there you have it. A dynamic path that will work on any of our sites.

I realized some people reading this already knew all of this but I didn't. So I figured I would share it because I bet there are others out there that also do not know about the {{ url('<front>') }} or {{ active_theme_path() }} Twig functions as well as the {{ directory }} variable. As I said before, there are many ways to handle this challenge, but in my case this is exactly how I wanted to approachh it. I hope this was helpful. Cheers!

When working on a component-based project, building components or patterns, can be a liberating experience because we are able to draft the best markup possible to build the most flexible, scalable and reusable components. If you work with third party platforms such as SharePoint, WordPress, Drupal, or others, this becomes even more rewarding as in most cases content management systems are not known for producing the best markup possible. However, this liberating experience can come a a price if you are not taking the appropriate measures and checks when building your library of patterns.
In this post I am going to discuss five critical principles I follow when building components. My goal is always to achieve first and foremost, semantic markup that works in all devices including assistive technologies, reusability, scalability, and finally, ease of use. In some cases it is hard to achieve all of these goals so it is important to understand where you draw the line and what is more important in the long term.

Disclaimer: Components and Paterns are used interchangeably.

Find patterns in your patterns

Ideally, before you begin building patterns, or components, you want to fully understand how and when these patterns will be used. Certainly there are times when we don’t have all this information when we first start working on a project, but if you do, take a detailed inventory of your patterns. Doing this will help you build better and more reusable patterns.
Failing to identify the patterns in your patterns can lead to bad decisions when building them. For example, let’s say we have a card component for displaying latest news articles, if we don’t know that there are cards for events that look similar to news articles, we may miss an opportunity to turn the card component into one we can use for multiple purposes in our website. But don’t let this get you down, building a website is an iteration process. If you later discover that the news card component can be leveraged for events, it’s perfectly okay to update the card component so it can be used with events as well. My point is that it is preferred if you can catch these patterns early on, but we all know that sometimes designs are not always available in full when a project is started and when they become available we may need to re-think our process of component-building.

Don't sacrifice simplicity over reusability

Reusability when working with components is important and should be at the forefront when building components, however, don’t paint yourself in a corner by over-engineering your components because you found a way to turn a component into a multi-level reusable machine. Trying to make your components do too much can lead to over complex development and in the long run, very hard to maintain. It is better to have components that are simple and easy to maintain even if it means you may have some components that are similar. It is hard to find the balance between simplicity and reusability and this discovery will only come as you work on your components. If you have to choose between simple and reusable, simple may be the way to go.

One set of markup for all devices

Earlier I mentioned that before you start building components you should have a full picture of how and when those components will be used by looking at the design comps. Of course this is not always possible, but in an ideally designs comps give us opportunities to identify areas of improvement or areas that could lead to potential problems. An example of a problem would be if you are provided the designs for mobile, tablet, and desktop. This is great, but let’s say the information displayed at each device type changes in such a way that you don’t know how to best write the markup so it works on all devices. In a perfect world, you should not have to alter the markup of your components per breakpoint. Doing so could lead to confusion on how content is rendered, not to mention problems with accessibility or even SEO. If you find that markup may be a challenge from breakpoint to breakpoint, it is perfectly okay to go back to the designer and propose updates to the design so a unified markup structure could serve all devices. In my experience, the designer would be okay with your recommendations as long as you are not completely changing the layout of the website but instead are simply proposing minor adjustments that don’t change the overall look and feel of the website.
In some cases a designer may not be fully aware that the designs they are proposing could lead to issue when the site is rendered in different device sizes, so it’s okay to bring these issues to their attention and you may find that they are onboard with your suggestions.

Find the right names for your patterns

Another way to paint yourself in a corner is by the name you choose for your components. Component names should be generic and yet descriptive so they can be used on different scenarios. Conversely, names that are too specific will limit when and how you can use those components. Let’s take a look at some bad component names and propose a better name:

• News Card: If we think back of how we can reuse components, naming a component News Card will limit us on what kind of content we can use this component on. What if Events use a similar card with minor differences? A better name for this component may be Card or Content Card. This allows us to use on any type of content.

• FAQ Accordion: We have seen this before, we want to build a collapsible list of Frequently Asked Questions so the name makes sense. However, what if we want the same functionality for other type of content such as Forums or Knowledge base content? A better name would simply be Accordion which describes the functionality of the component, not the content that it can hold.

• Latest News List: Again, we are limiting ourselves to only showing content of type news. A list of content should be generic so we can use them for any kind of content (i.e. Blog posts, events, popular content etc.). A more appropriate name would be Content List.

• Finally, Homepage Hero: It is not uncommon for Hero sections to be in multiple pages other than the homepage. By naming this component simply Hero, we can leverage it and use it in more than just the homepage. You may wonder, what if I have other types of heroes in non-homepage pages? Well, perhaps we can find alternative names for those, things like Hero Short, or Page Breaker, something that is descriptive and yet provides the ability to be used in multiple pages.

The above are only some examples of how a bad name can not only limit where or what type of content you can use your components with, but it can also lead to building unnecessary components.

Document your components

One of the great things about design systems like Pattern Lab, Storybook and others, is that they provide a way to document the details of your components. Documenting components can go a long way to ensure your entire team is fully aware of the why and how of your components.
I practice that I follow when building components is documenting the technical aspects of the component such as its name, where it is used, and details about any variants of the components. Just as important, I like to define the components fields, their data type and values they accept. This architectural information ensures gives your team and your stakeholders a detailed view of a components role in your project.

In closing, before you begin building components, take the time to study your design comps and take notes of how you feel you can make the most out of your components library. You will not get it right the first time, that’s okay. As long as you are giving yourself the room to iterate through the process, you can always go back and update a component if it will give you more flexibility and will turn your project into a solid component-based system.

In closing

You may not always get it righ the first time, but keeping these principles in mind will help you achieve better implementation of your website's patterns.

We are used to watching the news and somewhere in California there is a wildfire destroying nature and people's homes. In 30 years I have lived in the Los Angeles area I have never experienced this first hand. I've have been a victim of earthquakes but this was my first as a fire victim.

We first heard about the fires earlier in the week and the night of November 8th we knew the fires were escalating, but they were nowhere near our neighborhood. All this changed when we went to bed Thursday night and we noticed winds were pretty strong to the point that they would make loud and weird noises as they blew through trees and roof of our place.

We went to bed without a single concern. At 3:30 am. the morning of Friday November 9th, we woke up to loud screams and knocks on our door by the Fire Department. As I opened the door still half asleep, they told me we had 15 min minutes to get out and to head to the nearest shelter in place. They had to repeat this information about 3 times as I was still in disbelief and completely confused. As I looked out our door, this was the image I saw:

You probably can't tell from the picture but that fire is only feets away from our house. That is the same hills I hike on and now they are completely burned.

It gets worse

My wife and I got the kids ready and were only able to pick up passports and personal documents. We didn't have enough time to grab anything else except change cloths to something more practical for the weather.

We arrived at the shelter in place at around 4:00 am. and it was packed with people and pets. We also had a pet of our own. After registering we sit there for a while waiting to hear news but nothing was coming in. At around 5:00 am. we decided it would be best to leave to my parent's house, about 28 miles away. As we are ready to leave we see one of our neighbor who proceeds to give us the worst news of the morning. He informed us our building complex has been completely burned and our house is gone. We didn't know how to respond or react to these news. The thought that we no longer had a house was unreal. I recall telling my wife I didn't believe it but I had no way to prove it. I was probably in denial or perhaps hoping it wasn't true.

As we leave the shelter in place at around 5:30 am., my wife asked me to drive by our house to see for ourselves what it looked like. To our surprise, there was zero damage to our building or buildings in our neighborhood. I was both relieved and extremely upset at my neighbor for giving us such as bad and inaccurate information. I hope I can put this behind us, but for now I am still bothered by this.

The fire stopped short of our place and we could not be more fortunate. I was relieved and felt like we had made it through the worst when we saw our place still standing.

Then it gets better

While at the shelter in place, I notified several people at my job, Mediacurrent.com, that I was being evacuated and would not be able to work that day. The response from everyone was unbelievable. Mediacurrent's partner Paul Chason responded within seconds of my email to let me know that they were behind us and to let him know of anything we needed. This was the same message I received from many colleagues and friends. I have always felt fortunate to be part of a great team like Mediacurrent's, but they go above and beyond to support their employees. This is not the first time they have shown me this kind of support. The first time was when my wife was diagnosed with Chronic Kidney disease and Mediacurrent's response was unbelievable.

As other friends in social media learned about our situation, the flood of support was so great and it gave us strength and hope that we were going to be okay.

As we started communicating with other neighbors we began to feel more confident that we would be able to return home soon.

We came back home on Friday evening to pick up some stuff, including my wife's dialysis machine, which she uses every night as treatment for her chronic kidney disease, and also to clean up and change cloths. Things by then looked pretty normal in our neighborhood but the air quality was still pretty bad so we decided to go back to my parent one more night. On Saturday evening we returned home for good and began the cleaning process which was not as bad as it could had been.

In closing

I hope we never have to go through something like this again, and really hope our friends and family never have to go through this, but having the support of our family, friends and coworkers made this horrible experience more manageable. We want to thank our family for always being there, and for providing a place to stay during this emergency. Our Mediacurrent family for showing us that we are more than coworkers, we care for each other. Thank you to our friends who would continuously check on us and offer help. Finally, our deepest and most special thanks to the everyday heroes who risk their lives to help others; first responders, fire fighters and law enforcements who worked and continue working tirelessly to protect us.

Thank you - The Hernandezes. 🙏 ❤️

Sharing is caring.

I've been working on my personal blog (this site), for a while. I built it with Gatsby and little by little I have been adding extra functionality. Today I'm going to show you how I added social sharing links to allow visitors to share my posts with others using Twitter, Facebook, LinkedIn, and other channels.

For an example of the Sharing links, look at the icons above the hero image on this and every post on this site.

There are many ways to accomplish this but from the begining I wanted to use something that was simple and did not require too much overhead to run. There are solutions out there that require third libraries and scripts and I wanted to avoid that. A while back I was introduced to Responsible Social Share Links. The beauty of Responsible Social Links is that they do not need any Javascript to work. They use the sharing links available for most social media channels.

Let's take a look at some examples of what these links look like:

Facebook

https://www.facebook.com/sharer/sharer.php?u=URL_TO_SHARE

Twitter

<a href="https://twitter.com/intent/tweet/ ?text=Check this out &url=https://mariohernandez.io &via=imariohernandez" target="_blank">Share on Twitter</a>

Most of these links accepts several parameters. You can see these parameters in more details at the Responsible Social Share Links page for additional information. In addtion, some systems may require you to encode the links but luckily for us Reacts does this for us automatically.

Using the links in a Gatsby site (or React for that matter)

You may think, that's so easy, just modify each of the links with my personal information and done. That's true to an extend. However, the tricky part is dynamically passing the current page's URL and post title to your sharing link. So here's how I did it:

1. Edit your blog post template. In my case my blog post template is /src/templates/blog-post.js This is based on the Gatsby starter I used. Your mileage may vary.

2. Add the following code where you wish to display the sharing links to generate a twitter share link:

<Share> <ShareLink href={`https://twitter.com/intent/tweet/?text=${post.frontmatter.title} &url=https://mariohernandez.io${post.frontmatter.path}%2F&via=imariohernandez`}> // Optional icon <LinkLabel>Share on Twitter</LinkLabel> </ShareLink> </Share>

The example above creates a twitter share link and uses the data variables I am already using to print the blog post content. As you know, Gatsby uses GraphQL to query the posts and by doing this you have access to each of the fields in your post (i.e. title, path, tags, date, etc.).

In the example above, I am passing ${post.frontmatter.title} so when the post is shared the title of the post is included as your tweet text. In addition, I am linking to the current post by passing ${post.frontmatter.path}. Finally I am passing my twitter handle.

There are other parameters you can pass to your share links. Things like hashtags, mentions, and more. Following the same pattern you can do the same for Facebook, LinkedIn and others.

A much cleaner approach

You may have noticed that I created the sharing snippet directly in the blog-post.js template. A much cleaner approach would be to create a new React component for all yoru sharing links and include the component in your blog-post.js.

Here's the full snippet for all the social channels I am using:

<Share> <ShareLabel>Share this post</ShareLabel> <ShareSocial> <ShareItem> <ShareLink href={`https://twitter.com/intent/tweet/?text=${ post.frontmatter.title }&url=https://mariohernandez.io${post.frontmatter.path}%2F&via=imariohernandez`} > <span> <svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24" fill="none" stroke="currentColor" stroke-width="2" stroke-linecap="round" stroke-linejoin="round" class="icon icon-twitter" > <path d="M23 3a10.9 10.9 0 0 1-3.14 1.53 4.48 4.48 0 0 0-7.86 3v1A10.66 10.66 0 0 1 3 4s-4 9 5 13a11.64 11.64 0 0 1-7 2c9 5 20 0 20-11.5a4.5 4.5 0 0 0-.08-.83A7.72 7.72 0 0 0 23 3z" /> </svg> </span> <LinkLabel>Share on Twitter</LinkLabel> </ShareLink> </ShareItem> <ShareItem> <ShareLink href={`https://www.facebook.com/sharer/sharer.php?u=https://mariohernandez.io${ post.frontmatter.path }`} target="_blank" > <span> <svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24" fill="none" stroke="currentColor" stroke-width="2" stroke-linecap="round" stroke-linejoin="round" class="icon icon-facebook" > <path d="M18 2h-3a5 5 0 0 0-5 5v3H7v4h3v8h4v-8h3l1-4h-4V7a1 1 0 0 1 1-1h3z" /> </svg> </span> <LinkLabel>Share on Facebook</LinkLabel> </ShareLink> </ShareItem> <ShareItem> <ShareLink href={`https://www.linkedin.com/shareArticle?mini=true&url=https://mariohernandez.io${ post.frontmatter.path }&title=${post.frontmatter.title}&source=${post.frontmatter.title}`} target="_blank" > <span> <svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24" fill="none" stroke="currentColor" stroke-width="2" stroke-linecap="round" stroke-linejoin="round" class="icon icon-linkedin" > <path d="M16 8a6 6 0 0 1 6 6v7h-4v-7a2 2 0 0 0-2-2 2 2 0 0 0-2 2v7h-4v-7a6 6 0 0 1 6-6z" /> <rect x="2" y="9" width="4" height="12" /> <circle cx="4" cy="4" r="2" /> </svg> </span> <LinkLabel>Share on LinkedIn</LinkLabel> </ShareLink> </ShareItem> </ShareSocial> </Share>

In Closing

If you want to have a clean and light weight way to share your content with others, the Responsible Sharing Links may just be what you need.

One of the most popular components on any website I've worked on is the "Card" component. Depending on the website, the card component is used to group various pieces of content into a container which can be used throughout your website.

Read the full article on how to build a card comonent.

Component-based development is something I have been doing for at least five years and it is incredible that I still find myself learning something new every time I work on a new project. In addition to development, I write training curriculums on the topic and this gives me more exposure to this topic than most people. You’d think by now I should have learned all there is to learn about components and integrating them with Drupal, but that’s not the case, and I love it because I alway look forward to learning something new.

The inspiration for this post

I came across an outstanding blog series about Building with Emulsify Part 3: Component Complexity by Evan Willhite of Four Kitchens.

It's not you, it's me

I’d say I’m about 90% onboard with how Evan approaches component integration, but the part I am not a fan of is writing preprocess functions to achieve full integration, mainly because I am not well-versed in preprocess functions or PHP in general. There is absolutely nothing wrong with this, but what if you are someone like me who is not comfortable with preprocess functions or custom modules? So I decided to use most of the work Evan put together, but will perform the integration slightly differently so we only work with Twig and not PHP.

Both instances for which PHP code was required in Evan’s post were the result of using a Paragraph type to reference nodes. My approach will be to eliminate the paragraph type and work directly with the node entity.

Let’s start. I will pick up from Architecture since everything prior to this is typically the approach I take as well.

Architecture

We want administrators to create Nodes of any type and using a Display View Mode we can automatically display them using the card component. The one difference for me is that I don’t have a card variation.

Passing data between entities

Following Evan’s instructions, create a new Display view mode called Card. Here's another minor difference in that my Card uses an image field and date field in addition to title, body, and link fields. Here’s what the card looks like.

In the Card display view mode of an Article content type, ensure Body and Image are available. All other fields should be placed under Disabled. The Title and Date fields don’t display in the Manage Display screens, but they are always available in all Entity templates.

Integrating the Card component within a Node template

Just like in Evan’s post, we still need to associate a Node template with our Card. For this we will use the same template suggestion as Evan, node--card.html.twig.

{% include '@molecules/card/card.twig' with { 'image': content.field_image, 'date': date, 'title': label, 'body': content.body, 'link_url': url, 'link_text': "Read the article", } only %}

Displaying a list of cards with Views

Now that the Card component has been integrated with Drupal, let’s create a simple view to display a collection of nodes displayed as Cards.

The views' settings can be seen below with description of the important configurations to note.

A few things about the view:

• It’s called Latest Articles
• The page built by the view can be viewed at /blog
• Rather than using fields it uses the Card view mode we created earlier. This is the biggest advantage of integrating the Card component with the Entity, any time a node is displayed using the Card Display View Mode, the node will be displayed automatically as a Card.
• It only pulls nodes of type Article

With some minor CSS the articles would look like this:

In closing

There will be times when writing a preprocess will be required based on the requirements, but whenever possible I’d like to avoid it.

As many developers, when I hear the words "static website" I immediate think of creating flat HTML pages and editing them by hand. Times have changed. As you will see, Static Site Generators (SSG), offer some of the most advanced features and make use of latest technologies available on the web.

Static Site Generators are nothing new. If you search for SSG you will find many. One of the most popular ones is Jekyll, which I have personally worked with and it's a really good one. However, this post focusing on Gatsby. Probably one of the hottest system for creating static sites.

What is Gatsby?

Gatsby's primarily objective is to build static sites, but as you will learn, that's just the tip of the iceberg.

Gatsby is a blazing-fast static site generator for React.

How does Gatsby work?

While other SSGs use templating languages like Mustache, Handlebars, among others, Gatsby uses React. This not only allows for building modern component-driven websites, it also provides an incredible fast page rendering. Like mind-blowing fast.

Extending Gatsby

One of the most powerful features of Gatsby is its growing number of "Plugins". Plugins are the building blocks of Gatsby. They allow you to implement new features and functionality by running a couple of commands and making some configuration changes. Anything from adding Sass to your React project, creating a blog, configuring Google Anaylitics and many many more.

Plugins are contributed code kindly provided by the generous Open Source community which totally rocks. Anyone is able to write plugins and make them available to the world to consume and use.

Check out their Plugins page for a full list of ways you can take your static site to the next level.

Editorial Process

So we are building static sites and you may be wondering How do I create content for my site? There are several ways in which you can create a content editign workflow for your site. Probably the easiest way is to use static Markdown files. Markdown is a lightweight markup language with plain text formatting syntax. It is designed so that it can be converted to HTML and many other formats. Markdown is often used to format readme files, for writing messages in online discussion forums, and to create rich text using a plain text editor. This blog is using markdown. Since I am the only creating content I don't need a fancy administrative interface to crate content.

Markdown is only one of the ways you can create content for your static sites. Others include more advanced methods such as plugging in Gatsby with your Content Management System (CMS) of choice. This includes Wordpress, Drupal, Netlify, ContentaCMS, Contenful, and others. This means if you currently use any of those CMSs, you can continue to use them to retain a familiar workflow while moving your front-end workflow to a simpler and easier to manage process. This method is usually referred to as decoupled or headless, as your back-end is independent of your front-end.

Quering Data

As previously mentioned, Gatsby with the power of React create the perfect system for building robust, flexible and super fast static sites. However, there is a third component that takes that power to a whole new level, and that is GraphQL.

GraphQL is a query language for APIs and a runtime for fulfilling those queries with your existing data. GraphQL provides a complete and understandable description of the data in your API, gives clients the power to ask for exactly what they need and nothing more, makes it easier to evolve APIs over time, and enables powerful developer tools.

Deploying Gatsby

Hosting for a Gatsby site can be done anywhere where React apps can run. Nowadays that's pretty much anywhere. However, before investing in an expensive and highly complicated hosting environment, take a look at some of the simpler and less expensive options on this page.
You will see that for a basic website, you can use several of the free options such as github pages, netlify and others which already include advanced continuous integration workflows. For more advanced sites where a CMS may be involved, you can also find options for deployment that will simplify your DevOps process.

My own blog is running out of a github repo that automatically get deployed when I push new updates. This is happening via Netlify which to me is probably the easiest way I have ever deployed a website.

In closing

Don't worry if you are a little skeptical about static site generators. I was too. However, I gave Gatsby a try and I see myself building more gatsby sites in the future. Before Gatsby I worked with Jekyll which is also a great static site generator, but what sets Gatsby apart is its seamless integration with React and GraphQL. The combination of those 3 provides endless posibilities in your web building process. Check it out.